Backyards hide the lines 811 skips
A pool dig happens almost entirely on the private side of the meter. That is where 811 stops marking. Irrigation mains, the electric run to a shed or dock, propane lines, septic tanks, drainfields and old drain lines are all the owner's. None of them get flags from the utility companies.
The homeowner rarely knows where they run. The excavator finds out first, usually with the bucket. Then the dig day turns into a repair day, and the shell, plumbing and deck schedule slides with it.
GroundScout marks those lines before your crew mobilizes, so the dig day stays a dig day.
What gets hit on these jobs
- Irrigation mains and zone lines
- Septic tanks, drainfields and sewer laterals
- Electric feeds to sheds, docks, lights and pool equipment
- Propane and natural gas lines to grills, heaters and generators
- Low-voltage lighting, cable and fiber drops
What the locate involves
GroundScout sweeps three areas: the pool footprint, the equipment pad and the path your excavator and trucks will take to get there. If the heater, gas or electric feed needs a trench back to the house, that route gets swept too.
Metal lines and tracer wire are traced with an electromagnetic (EM) locator. Plastic irrigation, PVC drain lines and septic parts carry no signal, so ground penetrating radar covers them. Each line is painted and flagged in its APWA color, with depth estimates where the signal supports them.
If a line runs right through the pool shape, you know before the excavator is on the trailer. That leaves time to relocate it, cap it or shift the layout.
What a pool-dig locate costs
Half day: $600
EM and GPR sweep of the footprint, pad and access path, paint and flags, and a photo-documented field sketch. Most backyards fit here.
Full day: $1,100
Large lots, long trench runs back to the house, or yards crowded with lines.
Maps and CAD: quoted
Drafted utility maps and CAD files are priced with the job.
You get a flat quote before the visit, not an hourly bill. Weigh it against one cut irrigation main or a severed feed to the pool equipment, plus the day your crew loses waiting on the repair.
Why pool builders call GroundScout
- Both methods on every yard. EM and GPR together, because one alone misses plastic pipe and abandoned lines.
- Septic found before the dig. GPR can often pick up tanks and drain lines nobody has a drawing for.
- Fast. Same-week scheduling is typical and next-day happens often, so the locate fits between layout and dig day.
- Trained, not just equipped. Florida does not license utility locators. GroundScout's locator holds a Certificate of Locating Competency from Staking University.
- A record for the file. A photo-documented field sketch arrives the same week. It helps when a homeowner asks what was in the yard.
How it works, step by step
Call 811 first
It is free and it is the law in Florida. The utilities mark the lines they own.
Stake the layout
White-line or stake the pool shape and equipment pad, so the sweep covers exactly what will be dug.
Send the scope
Share the address, the layout and the access path. A plan or a photo of the stakes helps.
Get a flat quote
You get a half-day or full-day price and a date. Same-week scheduling is typical.
The yard gets marked
EM and GPR across the footprint, pad and access path. Paint and flags go down in APWA colors.
Dig with the record
A photo-documented field sketch arrives the same week. Move a line or shift the layout before dig day if you need to.
When to schedule the locate
After layout and before excavation. Paint fades fast in a Florida yard, and mowers and rain wear it down. Book the locate close to dig day.
If the layout changes after the sweep, the new area needs its own check.
What affects the result
Wet ground and clay cut radar depth. A small plastic irrigation line is a harder target than a septic tank. Plastic pipe with no tracer wire gives EM nothing to follow.
GroundScout tells you on site where a line could not be confirmed, so nobody assumes that part of the yard is clear.
Questions from pool builders
When should a pool builder call for a private locate?
After layout and before excavation. Once the pool footprint and equipment pad are staked, the sweep can cover exactly what will be dug.
Can you find a septic tank or drainfield before a pool dig?
Often. GPR can pick up tanks and lines in the right soil. Depth, soil and surface cover all affect the result, and GroundScout will tell you where a target could not be confirmed.
Does 811 mark anything in a backyard?
811 covers the lines the utility companies own, and those usually stop at the meter. Irrigation, septic, gas to the grill and the power run to the shed belong to the owner, and 811 will not flag them.
How much does a locate for a pool dig cost?
A half day is $600, and most backyards fit in it. Large lots or long trench runs back to the house can take a full day at $1,100. You get a flat quote before the visit.
Can you mark the trench route for the pool heater or electric feed?
Yes. Add the route from the house or meter to the equipment pad to the scope, and it gets swept with the rest of the yard.
Do you move or repair lines you find?
No. GroundScout locates and marks. Your crew or the right trade relocates or caps a line before the dig.
Service areas
GroundScout works across Hillsborough, Pinellas, Pasco, Polk, Manatee and Sarasota counties and the Orlando area. Local pages: Tampa, St. Petersburg, Clearwater, Largo, Palm Harbor, Brandon, Riverview, Plant City, Lutz, Wesley Chapel, Land O' Lakes, New Port Richey, Lakeland, Winter Haven, Bradenton, Lakewood Ranch, Sarasota, Venice and North Port.
