Dig once, in the right spot

Most plumbing excavation is on private lines: the sewer lateral, the water service, a fire line, a gas line past the meter. 811 will not mark the line you came to fix, and it will not mark the private lines that cross it.

GroundScout locates the target line where conditions allow and marks what crosses the dig area, using EM and GPR. That means a smaller hole, a faster repair and no surprise electric line in the trench.

A lateral repair often starts with a guess about where the pipe runs. A locate turns that guess into a mark on the ground.

What gets hit on these jobs

  • Sewer laterals and cleanouts
  • Private water services and fire lines
  • Gas lines past the meter
  • Electric and communications lines crossing the trench
  • Irrigation and drain lines

What the locate involves

Two jobs happen at once. GroundScout looks for the line you came to work on, and it marks everything that crosses the dig area.

Cast iron, copper and other metal pipe trace with an EM locator. PVC and clay sewer pipe carry no signal, so the route is found with ground penetrating radar from the surface, starting from cleanouts, vents and other clues. Tracer wire helps when the installer left one.

Lines are painted in their APWA colors: green for sewer, blue for water, yellow for gas, red for electric and orange for communications. Depth estimates come where the signal supports them.

For laterals and tanks in more detail, see sewer and septic line tracing.

What a locate for a plumbing job costs

Half day: $600

EM and GPR sweep of the dig area, the target line where it can be found, paint and flags, and a photo-documented field sketch.

Full day: $1,100

Long laterals, commercial sites or several lines to trace.

Maps and CAD: quoted

Drafted utility maps and CAD files are priced with the job.

You get a flat quote before the visit, not an hourly bill. Tell us where the cleanouts are and what pipe you expect. That shortens the trace.

Why plumbers call GroundScout

  • A smaller hole. Knowing where the line runs means digging once in the right spot.
  • No surprises in the trench. Electric, gas and communications lines crossing the dig get marked too.
  • Radar for plastic and clay. PVC and clay laterals can show on GPR when EM has nothing to follow.
  • Fast. Same-week scheduling is typical and next-day happens often. After-hours work is available when a repair cannot wait.
  • Trained, not just equipped. Florida does not license utility locators. GroundScout's locator holds a Certificate of Locating Competency from Staking University.

How it works, step by step

Call 811 first

It is free and it is the law in Florida. The utilities mark the lines they own.

Send the scope

Share the address, the line you need, the cleanout locations and the dig area.

Get a flat quote

You get a half-day or full-day price and a date. Same-week scheduling is typical.

Target line traced

EM on metal pipe, GPR on PVC and clay, starting from cleanouts and other surface clues.

Crossings marked

Everything crossing the dig area gets painted and flagged in APWA colors.

Dig in the right spot

A photo-documented field sketch arrives the same week.

When to schedule the locate

Before the repair dig, once you know roughly where the problem is. Also before a new service or lateral goes in across a yard that already has irrigation, gas or electric in it.

What affects the result

Deep laterals, wet ground and roots can weaken a radar read. Plastic pipe with no tracer wire gives EM nothing to follow.

GroundScout marks where a trace stopped, so nobody assumes the line ends there.

Questions from plumbers

Can you find a PVC or clay sewer line?

Often. Those pipes carry no signal on their own, so the locate relies on GPR from the surface and on tracer wire where one was installed. Soil and depth affect the result.

Do you repair the line or run a camera?

No. GroundScout locates and marks so you can dig in the right place.

Does 811 mark the sewer lateral?

No. The lateral from the building to the main is almost always the owner's line, and 811 does not mark it.

How much does a locate for a plumbing repair cost?

A half day is $600 and a full day is $1,100. The size of the dig area and the number of lines decide which one fits. You get a flat quote before the visit.

Can you come out after hours?

Emergency and after-hours work is available. Call instead of emailing if the crew is already on site.

What helps the locate go faster?

Find the cleanouts, open gates and meter boxes, and share any drawing or survey. Even a rough sketch saves time.

Service areas

GroundScout works across Hillsborough, Pinellas, Pasco, Polk, Manatee and Sarasota counties and the Orlando area. Local pages: Tampa, St. Petersburg, Clearwater, Largo, Palm Harbor, Brandon, Riverview, Plant City, Lutz, Wesley Chapel, Land O' Lakes, New Port Richey, Lakeland, Winter Haven, Bradenton, Lakewood Ranch, Sarasota, Venice and North Port.