A fence line crosses everything
A fence runs the edge of the property, and so do a lot of buried lines. Irrigation loops follow the lot line. Electric and cable drops cross it. Septic lines and well feeds sit closer to it than most owners think.
811 marks the utility-owned lines. GroundScout marks the private ones along your post layout, so the crew can shift a post a foot instead of repairing a line.
A long run puts dozens of holes in the same strip of ground those lines follow. One hole in the wrong spot costs more than the locate.
What gets hit on these jobs
- Irrigation lines along the lot edge
- Electric feeds to gates, lights and outbuildings
- Cable, phone and fiber drops
- Septic lines, drainfields and well feeds
- Low-voltage wire for gate operators and lighting
What the locate involves
You send the layout. GroundScout sweeps a corridor along the fence run, plus each gate, gate operator and light location. The whole yard does not need a sweep unless you want one.
EM picks up electric, cable, metal pipe and tracer wire. Ground penetrating radar covers plastic irrigation and drain lines that give EM nothing to follow.
Where a line crosses or runs along the fence, it is painted and flagged in its APWA color, with a depth estimate where the signal supports one. Your crew sees each crossing before the auger does.
What a fence-line locate costs
Half day: $600
EM and GPR sweep of the fence corridor and gates, paint and flags, and a photo-documented field sketch. Most residential yards fit here.
Full day: $1,100
Long commercial or acreage runs, or corridors crowded with lines.
Maps and CAD: quoted
Drafted utility maps and CAD files are priced with the job.
You get a flat quote before the visit. Send the length of the run and the number of gates, and you hear back the same business day.
Why fence contractors call GroundScout
- Only the corridor you need. The sweep follows your layout, so the time goes where the posts go.
- Both methods on every run. EM and GPR together, because one alone misses plastic irrigation and abandoned lines.
- Gate wiring checked. Low-voltage wire for gate operators and lights sits shallow and gets hit often. It is part of the sweep.
- Fast. Same-week scheduling is typical and next-day happens often.
- Trained, not just equipped. Florida does not license utility locators. GroundScout's locator holds a Certificate of Locating Competency from Staking University.
How it works, step by step
Call 811 first
It is free and it is the law in Florida. The utilities mark the lines they own.
Lay out the run
Flag or paint the post line, the gates and any operator or light locations.
Send the scope
Share the address, the layout and the length of the run.
Get a flat quote
You get a half-day or full-day price and a date. Same-week scheduling is typical.
The corridor gets marked
EM and GPR along the run. Crossings are painted and flagged in APWA colors.
Set posts with the record
A photo-documented field sketch arrives the same week. Shift any post that lands on a line.
When to schedule the locate
After the layout is set and before the auger comes out. Paint fades fast in a Florida yard, so book it close to install day.
If the run moves after the sweep, the new section needs its own check.
What affects the result
Shallow low-voltage wire, small plastic irrigation lines and wet ground are the hard targets. A fence along the property edge can also sit near the utility's own lines, so the 811 marks matter as much as the private ones.
GroundScout points out anything it could not confirm before your crew starts digging.
Questions from fence contractors
Do fence posts really hit utility lines?
Yes. Post holes are deep enough to reach irrigation, low-voltage wire, cable drops and shallow electric. A long fence run means many holes along the same corridor those lines follow.
Can you mark only the fence line instead of the whole yard?
Yes. Send the layout and GroundScout will sweep the fence corridor and any gate or equipment locations.
Does 811 mark the lines along my fence line?
811 marks the lines the utility companies own. Irrigation, gate wiring, septic lines and drops to outbuildings belong to the owner, and 811 leaves them unmarked.
How much does a fence-line locate cost?
A half day is $600, and most residential yards fit in it. Long runs or crowded corridors can take a full day at $1,100. You get a flat quote before the visit.
Can you find the wire for a gate operator?
Often, when a signal can be put on it or it shows on radar. Shallow wire is easy to hit, so tell us where the gate operator and lights are.
How fast can you come out?
Same-week scheduling is typical and next-day happens often.
Service areas
GroundScout works across Hillsborough, Pinellas, Pasco, Polk, Manatee and Sarasota counties and the Orlando area. Local pages: Tampa, St. Petersburg, Clearwater, Largo, Palm Harbor, Brandon, Riverview, Plant City, Lutz, Wesley Chapel, Land O' Lakes, New Port Richey, Lakeland, Winter Haven, Bradenton, Lakewood Ranch, Sarasota, Venice and North Port.
